Equipment & Testing Capability

- CAD System for Drawings

•AutoCAD
•Solidwork
•Gerber

- S-Parameter testing (Return Loss, VSWR, Insertion Loss, Isolation, Gain, etc.)

- ENA5063A

- Radiation Pattern Test (Gain, Axial Ratio, Phase Center, Amp/Phase Tracking,
Side lobe, F/B Ratio, etc…)

- Planar, Cylindrical, Spherical Near/Far Field System is
Capable of Measuring Different Types of Antennas.
- Anechoic Chamber Size: (30ftx30ftx30ft), and (12ftx12ftx12ft)
- Frequency Range: 250 MHz to 60 GHz
- Testable Antenna’s Size: 3’x3’x3’
- Pattern: Narrow Beam, Broad Beam, Fan Beam, and Omni-directional

- Radiation Pattern Data Formats (Hard copies, PDF, BMP, or ASCII format)

- 2-D Rectangular/Polar Plots
- 2-D/3-D Contours Plots
- Co/X-Polarization of Amp/Phase Data-Matrix
- Percentage of Gain Coverage.
- Percentage of Axial Ratio Coverage.

Environmental Testing (Full QM/FM Testing)

We are currently teamed up with the following environmental laboratories to perform full QM testing. The following companies are local in our area. Our Quality control and engineering staff will constantly monitor the test. All tests such as humidity, temperature vibration, shock, etc., are performed according to MIL-STD-810G, RTCA/DO-160D/E, MILSTD-461/462/464, Direct Lightning, TSO-C139/144, and/or customer specifications.

Specifications & Mil-STD Used for
Design, Fab, Test, Material & Process

I. Standards, Mil-STD and Specifications for Design/Fab/Test:

1) TSO: C-144, C-139, C-169a
2) Environmental: RTCA/DO-160D, TSO C144, DO-228, MIL-STD-810; SAE J1455 (Automotive), MIL-STD-1472F (DoD)
3) Lightning: DO-160F, Direct Effects , Section 23
4) Electrical: RTCA/DO-160D, TSO C144, DO-228/DO-254, Mil-STD-461F, MIL-STD-810, MIL-HDBK-5400
5) CE: EMC Directive 89/336/EEC (European Union) & 47CFR, Part 15, Subpart B (FCC)
6) EMI, EMC / Emission: DO-160D/E, DO-228, MIL-STD-810G, MIL-STD-464C / EN 55022: 2006 / U.S. 47 CFR PART 15, SUBPART B
7) Immunity: EUROPEAN STANDARD EN 55024: 1998, Amendment A2: 2003
8) Hazardous / REACH Compliance: NAS411-1, SVHC by ECHA

II. Standards, Mil-STD and Specifications for Design/Fab/Material/Process:

1) Stainless Steel Material: Mil-STD-889B, DFARS 252-225-7009/DFARS 225.872-1.
2) Screws: Mil-STD-889B, DFARS 252-225-7009/DFARS 225.872-1.
3) Connectors/Adapters/Cables: Mil-PRF-39012/55339, IPC JSTD-001 Rev E, DFARS 252-225-7009/DFARS 225.872-1.
4) Pick/Place and Soldering: JESD-625, ANSI/ESD-S20.20, IPC JSTD-001 Rev E, IPC-A-610 Class 3.
5) Printed Circuit Board (PCB): IPC-A-600G, JESD-625, ANSI/ESD-S20.20, IPC JSTD-001 Rev E, IPC-A-610 Class 3.
8) Solder: No Pure Tin (<3% Pb) Solder unless otherwise specified in the PO for RoHS. JESD-625, ANSI/ESD-S20.20, IPC JSTD-001 Rev E.
9) ESD: IPC JSTD-001 Rev E.
10) Aluminum Material: Mil-STD-889B, Al6061-T6/ASTM-B-221.
11) Chem Film: Mil-C-5541F Type I Class 3 for Yellow. Type II Class 3 for Clear (ROHS). MIL-A-8625F Type II & III (Hard Anodize).
12) Nickel plating (EN): MIL-AMS2404/AMS2404 Class 4. MIL-C-26074E, AMS-2404C, AMS-2405B, AMS-2433B
13) Gold Plating: Mil-G-45204, Mil-DTL-45204; Type II, Gr C, I and III, Gr A ; ASTM B488; AMS 2422; SCGPS 06024
14) Zinc Plating: ASTM B633, Type I, II, III (clear, yellow and black); AMS 24025
15) Painting / Identification: FED-STD-595B, MIL-PRF-85582E, MIL-PRF-85285E / MIL-STD-130N-1
16) Inspection / FAI / Safety: MIL-I-45208A / (AS/EN/SJAC 9102) / RCC-324-01
17) Equipment/Tools Calibration: ISO17025:2005 & ANSI/NCSLZ540-1.

Equipment & Testing Capability

Environmental Testing (Full QM/FM Testing)

Specifications & Mil-STD Used forDesign, Fab, Test, Material & Process

Specifications & Mil-STD Used for
Design, Fab, Test, Material & Process